Audio-Technica ES915ML18 MicroLine® Condenser Microphone (18″ long)

In stock

Compare
SKU: ES915ML18 Category:

Audio-Technica ES915ML18 MicroLine® Condenser Gooseneck Microphone (18″ long)
The new Engineered Sound®. Contractor-exclusive innovations for every acoustical challenge. And safe haven from RFI.

Equipped with Audio-Technica’s legendary electro-acoustic design innovations, the Audio-Technica ES915ML18 is ideal for applications where quality sound and flexible performance are imperative. This small-diameter gooseneck microphone provides highly flexible positioning while maintaining a well-contoured appearance. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations.

The Audio-Technica ES915ML18 also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone’s low-profile element provides a uniform MicroLine® polar pattern with 90º acceptance angle. The microphone can be mounted on a podium or desktop with the included AT8474 low-profile isolation mount, which attenuates noise, shock and vibration transmitted through the mounting surface.

Features
• Designed for professional recording and demanding sound pickup applications
• Low-profile element provides uniform MicroLine polar pattern
• Plugs into any standard XLRF-type connector
• Included low-profile isolation mount attenuates noise, shock and vibration

ElementFixed-charge back plate, Permanently polarized condenser
Polar PatternMicroLine
Frequency Response30 – 20,000 Hz
Open Circuit Sensitivity-35dB (17.7 mV) re 1V at 1 Pa
Impedance250 ohms
Maximum Input Sound Level133 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off80 Hz, 18 db/octave
SwitchesFlat, roll-off
Dynamic Range109 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio70 dB, 1 kHz at 1 Pa
Phantom Power Requirements11-52V DC, 4 mA typical
WeightES915ML12 129 g, ES915ML18 139 g, ES915ML21 144 g, ES915ML24 149 g
DimensionsLength – ES915ML12 423.8 mm, ES915H18 576.2 mm, ES915ML21: 652.4 mm, ES915ML24 728.6mm
Head diameter 8.0 mm (all models),
Base diameter 18.9 mm (all models)
Output Connector (Power module)Integral 3-pin XLRM-type
Accessories IncludedAT8138 MicroLine foam windscreen, AT8474 universal isolation mount, AT8473 quick-mount stand adaptor, 5/8"-27 to 3/8"-16 threaded adaptor
Submit your review

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Message Us
Loading...