Blackmagic URSA Mini Pro PL Mount

Blackmagic URSA Mini Pro PL Mount for Professional cameras

Blackmagic URSA Mini Pro PL Mount lets you use the world?s highest-quality professional cinema lenses with your URSA Min Pro camera. The PL lens mount features contact pins for compatibility with Cooke?s i/Technology protocol so information such as lens make and model, serial number, iris setting, focus distance, and zoom position can be saved as metadata and used in software like DaVinci Resolve. In addition, you can also power and control broadcast-style cine-servo zoom lenses using the camera?s 12-pin Hirose connector. The PL mount kit includes 1 x PL mount, 1 x Shim set, 1 x PL baffle, 1 x Baffle tool, and 5 x 2mm Hex M2.5 x 22mm mount screws.

1 x PL mount

The PL mount is shipped with a protective dust cap.

1 x PL baffle

The PL mount baffle helps to control and direct the light entering the sensor.

1 x Baffle tool

Use the PL baffle tool to tighten the baffle in your camera.

5 x 2mm Hex M2.5 x 22mm mount screws

The five M2.5 x 22mm Hex screws are exclusive to the PL mount so you can keep the screws together with the respective mount. The PL mount kit also comes with a full spare set of screws in case the originals are misplaced.

Tools Required

When attaching the PL mount, you will need a 2mm Hex driver. While it?s not absolutely required, we recommend using a torque wrench able to accurately set a maximum torque of 0.45Nm to reduce the potential of over-tightening the screws.

Attaching the PL Mount

• Gently insert the PL baffle into the center of the lens mount and turn until it is finger-tight. Use the wide end of the baffle tool to tighten the baffle slightly. You need just enough pressure to keep it in place.
• Carefully place the Blackmagic URSA Mini Pro PL lens mount onto the camera body. Ensure the pins on the PL mount for Cooke /I Technology are located at the 12-clock position.
• Using a 2mm Hex driver or torque wrench set to 0.45Nm, loosely turn the five mounting screws until initial contact is made with the shoulder of the lens mount. To access all five screws, you will need to rotate the PL locking ring, as some holes are obscured when the ring is either open or closed.
• Confirm the lens mount is level and correctly aligned, then tighten the screws in the order shown here to an even pressure without overtightening the screws.
• 12-Month Limited Manufacturer’s Warranty.

To view more Blackmagic products

Related Products:

Blackmagic Pocket Cinema Camera 4K Handheld Digital Film Camera

Blackmagic Pocket Cinema Camera 6K Camera with EF Lens Mount

Blackmagic URSA Viewfinder

Blackmagic URSA Studio Viewfinder G2

Blackmagic URSA Mini Recorder

M by Indhu 27 Feb 2023