Home » Products » Intercom » Clearcom Wired » Industrial & Marine /Offshore » Clear-Com MS-802-IM Two-Channel Main Station

Clear-Com MS-802-IM Two-Channel Main Station

SGD 3,707.00 excl. Tax

Check Product availability with us on WhatsApp or inquiry form before placing order

 
SKU: MS-802-IM Category:
Description
Click to rate this post!
[Total: 1 Average: 5]

Clear-Com MS-802-IM 2-Channel 1RU Main Station with built-in Speaker

Clear-Com MS-802-IM is a 1RU two-channel main station with programmable front panel buttons, individual channel short-circuit protection, individual channel volume control, and a regulated fail-safe power supply. The MS-802-IM supports up to 55 beltpacks or 10 speaker stations

Monitoring System

The MS-802-IM can monitor intercom activity on one or both channels with individual listen-level controls. Monitoring intercom activity is possible through a headset or the internal loudspeaker.

Talk Selection

The MS-802-IM has mic pre-amps with limiters and speech-shaping circuits. An individual electronic momentary/latching Talk button is available for each channel. Illuminated dual-action Talk buttons light an LED dimly when latched: blue-color while in standby, amber-color when latched. The latching feature can be disabled. The channels can be accessed separately or simultaneously without tying them together. A selector switch toggles between the headset or microphone. The Talk buttons can also be controlled with a footswitch.

Announce Output

For paging, the MS-802-IM provides a balanced, line-level output signal to a 1/4-inch TRS connector on the rear panel. The front panel Announce button activates the output and the Announce relay. The relay circuit, on a separate 1/4-inch TRS connector, is typically used to mute monitors.

Call Signaling

The MS-802-IM has individual Call buttons with visual call signaling for each channel on the partyline. The visual signal will flash brightly and will emit an audible signal if the remote station operator holds the Call button for more than 2 seconds. The call signaling feature can be programmed to the Talk buttons.

Remote Mic Kill (RMK)

The MS-802-IM has a global Remote Mic Kill button. It will turn on the microphone talk circuits of all beltpacks on the system, eliminating extraneous noise from the open headset microphones.

Program Input and Interrupt (IFB)

The MS-802-IM accepts a line-level external program input for monitoring in the headset and speaker, and/or mixing with intercom audio on either or both channels. When Interrupt is selected, the program signal is interrupted when the Talk button is pressed.

Power

The MS-802-IM has a visual indication of power supply conditions. In the event of a short circuit or current overload on a channel, that channel will shut down while the other one continues to operate. As soon as the fault condition is removed, the auto-reset circuitry will restore power to that channel, even under full-load conditions.

Related Products:

RM-802-IM Encore 800 Remote Station
RS-801-IM Single-Channel Beltpack
RS-802-IM 2-Channel Beltpack
KB-802GM-IM 2-Channel Remote Speaker Station

Features
Click to rate this post!
[Total: 1 Average: 5]
  • Supports up to 55 beltpacks or 10 speaker stations on two channels
  • IP-20 environmental rating
  • Asbestos-free in accordance with SOLAS Regulation II-I/3-5.2
  • Marine Certification compliant with DNVGL-CG-0339 (2016)
  • Separate short-circuit protection for each channel
  • Program feed to both channels, with selectable Program Interrupt (IFB)
  • Remote Mic Kill
  • Announce output with relay
  • Visual and audible Tone Alert signaling
  • Built-in speaker
  • Universal voltage power supply
Specifications
Click to rate this post!
[Total: 1 Average: 5]

Station Capacity
Up to 55 RS-801-IM beltpacks or 10 speaker stations or 12 headset stations distributed over both channels

Panel Microphone Input

  • Input Type: Electret
  • Input Impedance: >=2K
  • Mic Limiter Threshold: 0dBu ±3dB
  • Mic Limiter Range: >= 20dB

Headset Microphone Input

  • Input Type: Dynamic
  • Input Impedance: >= 1K
  • Mic Limiter Threshold: 0dBu ± 3dB
  • Mic Limiter Range: >= 15 dB

Program Line Input

  • Maximum Level before Clipping: >= 20dBu
  • Input Impedance: >= 5K

Headset Output

  • Load Impedance: >= 8
  • Output Impedance: <= 25
  • Output Limiter Threshold: +5dBu ± 3dB
  • Maximum Output Level before Distortion: >= 17dBu

Speaker Output

  • Load Impedance: >= 4
  • Max Output Level before 1% Distortion: 20dBu ± 2dBu
    Partyline Output
  • O Noise: < -74dBu
  • Output Impedance: >10K

Partyline Input

  • Crosstalk: < -60dB
  • Max level before Clipping: >= 12dBu
  • Sidetone Null Capability: > 25dB

Stage Announce/Balanced Line Out

  • Type: Balanced
  • Output Impedance: >= 200
  • Load Impedance: >= 600

IFB/Hot Mic

  • Type: Unbalanced
  • Output Impedance: 180
  • Load Impedance: >= 600

Frequency Response

  • Panel Mic – Partyline: 600 – 10kHz ± 3dB
  • Headset Mic – Partyline: 200 – 12kHz ± 3 dB
  • Headset Mic – Line Out: 200 – 12kHz ± 3 dB
  • Program Input – Partyline: 100 17kHz ± 3 dB
  • Program Input – Headset Out: 200 – 10kHz ± 3 dB
  • Program Input – Speaker Out: 300 – 10kHz ± 3 dB
  • Partyline – Headset Out: 200 – 10kHz ± 3 dB
  • Partyline – Speaker Out: 300 – 10kHz ± 3 dB

Max Distortion

  • Panel Mic – Partyline: <= 0.5%
  • Headset Mic – Partyline: <= 0.5%
  • Headset Mic – Line Out: <= 0.5%
  • Program Input – Partyline: <= 0.2%
  • Program Input – Headset Out: <= 0.2%
  • Program Input – Speaker Out: <= 0.5%
  • Partyline – Headset Out: <= 0.2%
  • Partyline – Speaker Out: <= 0.5%

Noise

  • Panel Mic – Partyline: < -65dBu
  • Headset Mic – Partyline: < -70dBu
  • Headset Mic – Line Out: < -55dBu
  • Program Input – Partyline: < -85dBu
  • Program Input – Headset Out: < -60dBu
  • Program Input – Speaker Out: < -60dBu
  • Partyline – Headset Out: < -50dBu
  • Partyline – Speaker Out: < -50dBu

Max Gain

  • Panel Mic – Partyline: >= 37dB
  • Headset Mic – Partyline: 41dB ± 2dB
  • Headset Mic – Hot Mic Out: 55dB ± 3dB
  • Headset Mic – Announce Out: 55dB ± 3dB
  • Program Input – Partyline: >= -16dB
  • Program Input – Headset Out: >= 18dB
  • Program Input – Speaker Out: >= 24dB
  • Partyline – Headset Out: >= 34dB
  • Partyline – Speaker Out: >= 40dB

Min Gain

  • Panel Mic – Partyline: <= 25dB

Mains Power

  • Input Voltage Range: 100 – 240V AC
  • Input Frequency Range: 50 – 60 Hz
  • Input Power: <= 60V AC
  • Output Voltage: 30V DC ± 0.5V
  • Output Current per Channel (Continuous): 1.2A
  • Output Current per Channel (Peak): 2A (Do not exceed the 1.2A rating for more than 2 seconds per 1-minute period)
  • Short Circuit Recovery Time (1st short): <= 0.5 sec
  • Short Circuit Recovery Time >= 20 shorts in 20sec: <= 20 sec

Environmental

32 – 122°F (0 – 50°C)

  • Relative Humidity: 0 – 96%, non-condensing
  • Vibration Frequency Range: 2 – 13.2Hz
  • Amplitude: 1.0mm
  • Peak Value Frequency Range: 13.2 – 100Hz,
  • Acceleration Amplitude: 0.7g
  • EMC: DNVGL-CG-0339 – Class A
  • Enclosure: IP-20

Dimensions

1.75 x 19 x 6.5in (HxWxD)
(44 x 483 x 165mm)

Weight

6.1lbs (2.8kg)

Delivery Info
Click to rate this post!
[Total: 1 Average: 5]

How to shop TAX free in Singapore

9% Goods Service Tax (GST) will be imposed over the total invoice value if purchased locally in Singapore. However if you are a tourist visiting Singapore, this GST amount can be refunded at the Changi International Airport Departure Hall GST Refund Centre before departure with goods within 60 days from the date of purchase. Please note that only Tourists who have met the Tourist Refund Scheme’s conditions and eligibility criteria can claim for the GST refund. Visit the following link for GST Guide for Visitors on Tourist Refund Scheme. https://www.iras.gov.sg/taxes/goods-services-tax-(gst)/consumers/tourist-refund-scheme


All items that are available for purchase online are subjected to availability. For item that are available, a confirmation email will be sent to your registered email to show that your order had been processed and is ready for collection / to be delivered. In the event whereby the item ordered is unavailable, a notification email will be sent and refund will be initiated immediately.

Self-collect: Item will be ready for collection at our store once the confirmation email is received. Orders that are made on the Weekends or Public Holiday may take about 2-4 working days to process.

Delivery (Local, Singapore): Small items: Delivery will take approximately 3-5 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Singpost or local couriers.

Large / Bulky items: Delivery will take approximately 7-10 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Expandore.

Delivery (Overseas); Shipment will be arranged with our courier partners to be delivered to your shipping address.

If you have other inquiries for placing of order and delivery, you can refer to our FAQ here (https://www.expandore.sg/faq/) Or Contact us here (https://www.expandore.sg/contact-us/)

Reviews (0)
0 reviews
0
0
0
0
0

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.