Panel Specifications |
|
Panel size (diagonal in inch) |
16.5 |
Panel resolution |
1920 X 1080 Pixels |
Panel Aspect Ratio |
16 to 9 |
Panel Type LCD |
Yes |
Panel Modulation IPS |
Yes |
Back-light LED |
Yes |
Brightness in cd/m² |
450 |
Panel Bit depth: |
10 |
Image Processing Bit depth |
10 |
Panel response times in ms |
8 ms |
Viewing angle H/V |
H 178 / V 178 |
Contrast Ratio |
1500:1 |
IN-OUT´s Connections VIDEO |
|
Input HDSDI |
Yes, 3G |
Number of HDSDI Inputs |
2 |
HDSDI DUAL LINK |
Yes |
Input HDMI |
Yes |
Number of HDMI Inputs |
1 |
HDMI HDCP |
Yes |
Input YUV |
Yes, 3 x BNC |
Input Composite |
Yes |
Numbers of Composite Inputs |
2 |
Loop out HDSDI |
Yes, 2 with bridge function |
Loop out Composite |
Yes |
IN-OUT connections AUDIO |
|
Audio Line IN |
Yes, 2 x RCA and 1 x 3.5mm mini jack |
Audio Embetded Channel out |
Yes, selectable |
Speaker integrated |
Yes, 2 |
Watts |
2 X 1 Watts |
IN-OUT Connections Controls |
|
GPI IN |
Yes, RJ45 |
RS485/422 IN |
Yes, RJ45 |
RS485/422 Loop out |
Yes |
RS232 IN |
Yes, 9 Pin Sub D |
Service Port |
Yes, internal |
Supported Signal Formats |
|
Note for SMPTE/ITU Definitions |
SMPTE or ITU definitions have servile specification in-between, like SMPTE 274 for Interlace Frames rates for example, this is not reflecting here! Please ask for details Signal Spec´s and Frame-rate supports |
HDSDI/SD Signal Formats SMPTE-424M |
Yes |
HDSDI/SD Signal Formats SMPTE-425M-A/B |
Yes |
HDSDI/SD Signal Formatss BTA S-004C |
Yes |
HDSDI/SD Signal Format SMPTE-292M |
Yes |
HDSDI/SD Signal Formats DUAL-LINK or 3G SMPTE-372M-2002 |
Yes |
HDSDI/SD Signal Formats ITU-R BT656 |
Yes |
SDI SIgnal Formats SMPTE-259M |
Yes |
Signal Format ITU BT601-7 |
Yes |
Signal Format SMPTE-299M |
Yes |
Signal Format SMPTE-272M |
Yes |
HDMI Format 1080P plus |
up to 1080P |
Composite |
Yes, PAL/NTSC |
Dedicate Functions |
|
SDI Timecode |
Yes, LTC, VITC, and D-VITC |
R/G/B/Mono |
Yes |
H/V delay |
Yes, only with special upgrade |
Field/Frame mode |
Yes, Field 1 / Field 2 / Reverse only with special upgrade |
Scan Modes |
Progressive,/Field Cinema 3:2 pull down / 1:1 |
Safety area markers |
Yes, 80% to 100% |
Center Marker |
Yes |
Scale Markers |
Yes, 4:3/16:9/14:9/13:9/2.35:1/1.85:1/1.75:11.66:1 |
Area Marker Visibility |
OFF,Line,Half,Half+Line |
Tally via GPI |
Yes |
Tally Multi-Color |
Yes |
Low Latency Mode |
Yes |
Screen saver |
Yes |
Environment Power Save function |
Yes |
TSL UMD/IMD Support via: |
Yes, Serial RS485 |
Function Keys |
2 |
Direct Input Channel buttons |
Yes |
Auto Aspect |
Yes, Analogue and Digital sources |
OPERATION KEY-LOCK |
Yes |
Operation LED Dimmer (Buttons) |
Yes |
Direct Brightness/Contrast/Color control |
Yes |
Measurement and indication Tools |
|
Waveform |
Yes |
Waveform enlargement |
Yes |
Waveform subs |
R/G/B, Y/PB/PR, and Y/CB/CR. peak brightness with Over-level function. |
Vector-scope |
Yes |
Vector-scope enlargement |
Yes |
Vector-scope subs |
video,component, SDI (SD/HD) input signals. |
Histogram |
Yes |
Audio Level Meter |
Yes |
Audio Level Meter Channels |
16 |
Audio Level Meter subs |
Over Level Indication plus Lissajous Meter |
Calibration and Color settings |
|
Preset Color Temperature 9300K |
Yes |
Preset Color Temperature 6500K |
Yes |
Preset Color Temperature 5600K |
Yes |
Preset Color Temperature USER: |
Yes |
Manual calibration of Color Temperature (gain or/and cut-off) |
Yes |
External Auto-Calibration (Software Tool) |
Yes |
External Colormetrie Sensor needed |
Yes, Minolta CA-210, X-Rite i1 Display 2, i1 Display 3/Pro (OEM version), Jeti Specbos (with FTDI driver v.2.8.24), Datacolor Spyder4 |
Calibration Hints: |
Free Calibration Software in our Support area |
Gamma Levels |
2.2/ ,2.35,/2.45,/2.6 |
Adjustable Back-Light |
Yes |
Power and Enviroment Spec´s |
|
Power AC |
Yes |
DC Connector Type: |
|
Power consumption |
0.33 Ampere /AC |
Operation Temperature in Celsius |
5C to 35C |
Operation Humidity:(Non-Condensing) |
20% to 80% |
Storage Temperature in Celsius |
-20C to 60C |
Storage Humidity (Non-Condensing) |
10% to 90% |
Mechanical Information |
|
VESA Mount |
Yes |
VESA Format |
100×100 |
VESA Screw Type in Metric |
M4x4mm |
Rack-mount into 19″ Format |
Yes, optional |
Dimensions W x H x D in mm |
W:430mm / H:309mm / D:102mm |
Weight (without stand) in Kg: |
5.8Kg |
Weight in Kg: |
8.3Kg |
Include Package |
|
AC Power cord |
Yes |
Others |
CD Rom detail instructions , Power cord Holder, srews |
Instruction Doc: |
Yes |
Reviews
There are no reviews yet.