(+65) 6841 2889Â [email protected]
Marelux Apollo III 2.0 Underwater Strobe (Patented Design)
Product Highlights:
- Support TTL, Olympus RC, HSS
- With a specially designed MTL mode, supports continuous flashes
- With 2 fisheye wireless signal sensor units
- Waterproof battery chamber
- Full power flash around 1000 times
Description
Click to rate this post!
[Total: 3 Average: 5]
Marelux Apollo III 2.0 Underwater Strobe: A Professional’s Choice for Underwater Photography
The Marelux Apollo III 2.0 Underwater Strobe is a cutting-edge lighting tool for underwater photography enthusiasts and professionals. Engineered for vibrant illumination and seamless operation, it ensures stunning shots in the most challenging marine environments. In addition to these innovative features, the underwater strobe will also feature a full power recycle time of 0.8s and a guide number of 44. The amount of light transmitted by the strobe can be adjusted in 12 incremental steps, indicated on the rear button by the numbers 1-12. The strobe comes with a target light, which has two colors, red and white, and two brightness levels.
The Apollo II strobe also features a wireless trigger mode, which requires the Lumilink optical transmitter to work as the signal transmitter.
Apollo III 2.0 Strobe Target Light
In modes other than the test mode, press the mode knob to turn on the target light. The target light has two colors, red and white, and each color has two brightness levels. Press the mode knob to change the color and brightness level.
Wireless Trigger Mode
To use the wireless trigger mode, the Lumilink optical transmitter is required as the signal transmitter. When the flashlight is turned on, the wireless trigger mode is disabled by default. In modes other than the test mode, press and hold the mode knob for 2 seconds, and after hearing four “beep” sounds, the wireless trigger mode will be activated. (Wireless triggering is supported in M, M-HSS, and MTL modes.).
Press and hold the mode switch for 2 seconds, and after hearing two “beep” sounds, the wireless flash mode will be deactivated.
The reception distance of the optical signal receiver underwater is 2 to above 10 meters up to visibility and brightness of sunlight (under strong sunlight, the effective range of reception for the optical signal receiver is 60-70 cm, with a reception angle of 50-60 degrees).
Apollo III 2.0 Strobe Indicator Light
The emission color of the strobe indicator light will change depending on the remaining battery level. Emission colors are shown in the table below.
Emission color vs. remaining battery level:
- Blue: 80~100%
- Green: 60~80%
- Yellow: 40~60%
- Purple: 20~40%
- Red: 0~20%
When the strobe indicator light is in a low battery state with a red light, please refrain from using the flash function to avoid damaging the battery.
The strobe will preheat for 10 seconds when first turned on, during which the strobe indicator light will remain red. Please wait for the preheating to finish before using the strobe. When the strobe overheats, it will trigger an overheat protection mechanism, preventing further flash triggering. The strobe indicator light will become yellow, indicating the need for cooling for a few minutes
Light Level Control Knob
The light amount can be adjusted in 12 increments:
The tube’s lifespan is tested through one million full-power cycles. To achieve the longest possible lifespan and safety, the electronic components of the Apollo III are designed with redundant power, which may result in instability of brightness during low-power flickering. Minor variations in brightness will occur at positions below the third level in M mode and below the sixth level in MTL mode.
Applications:
- Wide-Angle Photography: Illuminate expansive underwater scenes with uniform lighting.
- Macro Photography: Capture intricate details of marine life with precision-controlled brightness.
- Recreational diving: To enhance underwater memories with vibrant and professional-quality images.
- Professional Assignments: Meet the demands of commercial and editorial underwater photography.
The Marelux Apollo III 2.0 Underwater Strobe is the ultimate companion for underwater photography, providing superior performance, reliability, and ease of use. With its advanced features and professional-grade quality, it ensures every dive results in breathtaking imagery.
To view more Marelux Products
- Underwater Housings
- Underwater Housings Zoom Gears
- Underwater Housings Ports
- Underwater Water Housings Accessories
Features
Click to rate this post!
[Total: 3 Average: 5]
- Support TTL, RC, HSS, and wireless triggering (The TTL, HSS, and RC modes require compatible flash triggers to be used)
- With a specially designed MTL mode, support continuous flashes
- With 2 fisheye wireless signal sensor units. Plus one fiber port, sensor coverage 160°. Wireless trigger supports M, MTL, and HSS. (TTL, RC needs fiber.)
- GN.ISO 100 : 44 (tested on land)
- Scattering angle 110 ° (under water)
- Temp 6200k
- With dome diffuser, scattering angle 120 °, Temp 5500k
- Full power recycle time: 0.6 second
- Max diameter 90mm, length of main body 150mm,full length including knobs 177mm
- Weight on land 960 grams (without battery, with ball mount),1095 grams with 3×18650 batteries (with ball mount)
- Weight in water 125 grams (including 3×18650 batteries, including ball mount)
- Battery: 3×18650 lithium batteries(discharging current equal or over 20A).135 grams total
- Water proof battery chamber
- Full power flash : around 800 times
- With 2 aiming light colors, 250 lumen on white, 180 lumen on red
- Waterproof Depth : 100m
- With The Lumilink 2.0 wireless transmitter,synchronize with your camera’s shutter speed up to S1/200.
- In shallow water and strong sunlight, it maintains a reliable connection up to 2 meters.
- In deep water and dim ambient light, the working distance extends to over 10 meters.
- The optical signal for triggering is encrypted, and designed to be anti-jam, minimizing interference.
Delivery Info
Click to rate this post!
[Total: 3 Average: 5]
How to shop TAX free in Singapore
9% Goods Service Tax (GST) will be imposed over the total invoice value if purchased locally in Singapore. However if you are a tourist visiting Singapore, this GST amount can be refunded at the Changi International Airport Departure Hall GST Refund Centre before departure with goods within 60 days from the date of purchase. Please note that only Tourists who have met the Tourist Refund Scheme’s conditions and eligibility criteria can claim for the GST refund. Visit the following link for GST Guide for Visitors on Tourist Refund Scheme. https://www.iras.gov.sg/taxes/goods-services-tax-(gst)/consumers/tourist-refund-scheme
All items that are available for purchase online are subjected to availability. For item that are available, a confirmation email will be sent to your registered email to show that your order had been processed and is ready for collection / to be delivered. In the event whereby the item ordered is unavailable, a notification email will be sent and refund will be initiated immediately.
Self-collect: Item will be ready for collection at our store once the confirmation email is received. Orders that are made on the Weekends or Public Holiday may take about 2-4 working days to process.
Delivery (Local, Singapore): Small items: Delivery will take approximately 3-5 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Singpost or local couriers.
Large / Bulky items: Delivery will take approximately 7-10 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Expandore.
Delivery (Overseas); Shipment will be arranged with our courier partners to be delivered to your shipping address.
If you have other inquiries for placing of order and delivery, you can refer to our FAQ here (https://www.expandore.sg/faq/) Or Contact us here (https://www.expandore.sg/contact-us/)
