Panasonic AV-HS7300 Live Switcher

General:

• Power Supply: AC 100 V to 240 V, 50 Hz/60 Hz
• Power Consumption: 460 W
• Ambient Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
• Ambient Operating Humidity: 10 % to 90 % (no condensation)
• Dimensions (W x H x D): 482 mm x 399 mm x 420 mm (excluding protrusions), 9RU
• Weight: Approx. 37 kg (when full option is installed, excluding accessories)

Video Terminal:

• SDI IN 1 to SDI IN 72 Terminals: During Standard mode
  Standard 36 lines
  • Connector: BNC x 36
  Maximum 72 lines
  • Connector: BNC x 72
• HD-SDI: HD serial digital, SMPTE292M (BTA S-004) standard compliant
  • 0.8 V [p-p] ± 10 % (75 Ω)
  • Automatic equalizer 100 m (when 1.5 Gbps/5C-FB cable is used)
• 3G-SDI: 3G serial digital, SMPTE424M standard compliant
  • 0.8 V [p-p] ± 10 % (75 Ω)
  • Automatic equalizer 100 m (when 3 Gbps/5C-FB cable is used)
  • 3G‑SDI Level A, 3G‑SDI Level B
• During 4K mode
  Standard 9 lines
  • Connector: BNC x 36 (construct one line of 4K signal with four terminals)
  Maximum 18 lines
  • Connector: BNC x 72 (construct one line of 4K signal with four terminals)
  • Can use the 4K signal in SQD format
• SDI OUT 1 to SDI OUT 42 Terminals: During Standard mode
  Standard 14 lines (SDI OUT 1 to SDI OUT 4: Two distribute output,
  SDI OUT 5 to SDI OUT 14: One distribute output)
  • Connector: BNC x 18
  Maximum 42 lines (SDI OUT 1 to SDI OUT 4, SDI OUT 15 to SDI OUT 18, SDI OUT 29 to SDI OUT 32:
  Two distribute output, other: One distribute output)
  • Connector: BNC x 54
  • ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, ME2KEYPVW, ME3PGM, ME3PVW, ME3CLN, ME3KEYPVW, ME4PGM, ME4PVW, ME4CLN, ME4KEYPVW, DSKPGM1, DSKPGM2, DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, DSK3CLN, DSK4CLN, SEL KEYPVW, MV1 to MV4, AUX1 to AUX24 can be assigned
• HD-SDI: HD serial digital, SMPTE292M (BTA S-004) standard compliant
  • Output level: 0.8 V [p-p] ± 10 %
  • Rise time: Less than 270 ps (HD)
  • Fall time: Less than 270 ps (HD)
  • Difference between rise time and fall time: 100 ps or less (HD)
  • Alignment jitter: 0.2 UI (130 ps) or less (HD)
  • Timing jitter: 1.0 UI or less (HD)
  • Eye aperture ratio: 90 % or more • DC offset: 0 ± 0.5 V
• 3G-SDI: 3G serial digital, SMPTE424M standard compliant
  • Output level: 0.8 V [p-p] ± 10 %
  • Rise time: 135 ps or less
  • Fall time: 135 ps or less
  • Difference between rise time and fall time: 50 ps or less
  • Alignment jitter: 0.3 UI or less
  • Timing jitter: 2.0 UI or less
  • DC offset: 0 ± 0.5 V
  • 3G‑SDI Level B

During 4K mode:
Standard 3 lines (construct one line of 4K signal with four terminals)
• SDI OUT 1 to SDI OUT 4: One line x two distribute output,
SDI OUT 5 to SDI OUT 12: Two lines x one distribute output

Maximum 9 lines (construct one line of 4K signal with four terminals)
• SDI OUT 1 to SDI OUT 4: One line x two distribute output,
SDI OUT 5 to SDI OUT 12: Two lines x one distribute output

• SDI OUT 15 to SDI OUT 18: One line x two distribute output,
SDI OUT 19 to SDI OUT 26: Two lines x one distribute output

• SDI OUT 29 to SDI OUT 32: One line x two distribute output,
SDI OUT 33 to SDI OUT 40: Two lines x one distribute output

• The 4K signal in SQD format can be used.
• ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, ME2KEYPVW, DSKPGM1, DSKPGM2, DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, SEL KEYPVW, MV1, and AUX1 to AUX6 can be assigned

• Signal Formats: 1080/59.94p, 1080/59.94i, 1080/50p, 1080/50i, 1080/29.97PsF, 1080/25PsF, 1080/23.98PsF, 2160/59.94p, 2160/50p
  Signal Processing – Y:PB:PR 4:2:2 10 bit
  R:G:B- 4:4:4 8 bit
  ME Number: 4ME (Standard Mode) / 1.5ME (4K Mode)

Synchronous Terminal:

• REF Terminal: In Genlock mode: Black burst or Tri-level Sync input signals (with loop-through)
  If the loop-through output is not used, provide a 75 Ω termination.
  Connector: BNC • Same field frequencies as those of the system formats supported
  Only the Genlock mode is supported for 1080/23.98PsF format
  In the 1080/23.98PsF format, black burst signals with 10 Field ID (SMPTE318M standard compliant) or Tri-level Sync signals supported
• Video Delay Time: During Standard mode
  1 line (H): When the frame synchronizer is set to [Off]
  2 field (V): When the frame synchronizer is set to [On]
  Maximum delay of 1 frame is added when passing through PinP, DVE, MultiView, or DVI-IN.

Control Terminal

• LAN Terminal: Compatible with 100BASE‑TX and AUTO-MDIX (For IP control)
  Connection cable: LAN cable (CAT5e), max. 100 m, STP (Shielded Twisted Pair) cable recommended
  Connector: RJ-45
• PANEL Terminal: Compatible with 100BASE‑TX and AUTO-MDIX (For Control Panel AV‑HS60C2/AV‑HS60C4 connection)
  Connection cable (supplied with AV‑HS60C2/AV‑HS60C4):
  LAN cable (CAT5e), straight cable, STP (Shielded Twisted Pair), 10 m
  Connector: RJ-45
• COM1 (M) / COM2(M) /COM3 (M) Terminals: RS-422 control terminal
  For master connection for controlling external devices
  Connector: D-sub 9-pin (female) x 3, inch screw
• COM4 (M/S) Terminal: RS-422 control terminal
  For master/slave connection for controlling external devices
  Connector: D-sub 9-pin (female), inch screw
  Switchable between master connection and slave connection by the menu
• GPI IN Terminal: GPI IN: 18 inputs, general-purpose, photocoupler sensing
  ALARM OUT: 1 output, open collector output (negative logic)
  Connector: D-sub 25-pin (female), inch screw
• GPI OUT1 / GPI OUT2 terminal: GPI OUT: 48 outputs, selected from general purpose, tally
  Open collector output
• Connector: D-sub 25-pin (female) x 2, inch screw

How to shop TAX free in Singapore

9% Goods Service Tax (GST) will be imposed over the total invoice value if purchased locally in Singapore. However if you are a tourist visiting Singapore, this GST amount can be refunded at the Changi International Airport Departure Hall GST Refund Centre before departure with goods within 60 days from the date of purchase. Please note that only Tourists who have met the Tourist Refund Scheme’s conditions and eligibility criteria can claim for the GST refund. Visit the following link for GST Guide for Visitors on Tourist Refund Scheme. https://www.iras.gov.sg/taxes/goods-services-tax-(gst)/consumers/tourist-refund-scheme

All items that are available for purchase online are subjected to availability. For item that are available, a confirmation email will be sent to your registered email to show that your order had been processed and is ready for collection / to be delivered. In the event whereby the item ordered is unavailable, a notification email will be sent and refund will be initiated immediately.

Self-collect: Item will be ready for collection at our store once the confirmation email is received. Orders that are made on the Weekends or Public Holiday may take about 2-4 working days to process.

Delivery (Local, Singapore): Small items: Delivery will take approximately 3-5 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Singpost or local couriers.

Large / Bulky items: Delivery will take approximately 7-10 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Expandore.

Delivery (Overseas); Shipment will be arranged with our courier partners to be delivered to your shipping address.

If you have other inquiries for placing of order and delivery, you can refer to our FAQ here (https://www.expandore.sg/faq/) Or Contact us here (https://www.expandore.sg/contact-us/)