Name: RODE NT-1 + AI-1 Studio Kit with Audio Interface
SKU: NT1/AI1Kit
Price: 310.46 USD
Availability: InStock

Description
Features
Specifications
Delivery Info
Reviews (0)

Description

RODE NT-1 + AI-1 Studio Kit with Audio Interface

The Complete Studio Kit comes with the RØDE NT1 studio condenser microphone, a shock mount, pop-shield, RØDE XLR cable and USB-C/A cables to transfer data from your AI-1 to your computer, and power – including 48V phantom power to your AI-1.

RODE’s AI-1 Audio Interface is stacked with incredible technology to ensure recording on your computer is easy, versatile and sounds superb. The AI-1 USB Audio Interface adds studio-quality Input and Output capabilities to your PC or Mac, turning your recording software into a full recording setup.

With its high quality Neutrik XLR-1/4” Combo Jack combined input and discrete Class-A preamp, the AI-1 allows you to connect a microphone or instrument or line level audio signal to your Mac/Windows computer for recording. The AI-1 provides the necessary A/D conversion at up to 24 bit/96kHz.

The AI-1 also allows playback and monitoring of audio either direct from the microphone or via playback from the recording software. This is done via a high-quality discrete headphone amplifier and outputs via either the ¼’’ headphone output on the front of the unit or the balanced ¼’’ outputs on the rear of the unit.

As for inputs: the AI-1’s got both kinds…

Rode NT-1 + AI-1 Interface Bundle
The AI-1’s single input is a NeutrikTM Combo Jack, which takes both a 3-pole XLR (common to most microphones) and a quarter-inch jack common to most electric instruments like guitar, bass et al. Layering tracks is as easy as plug in, set level and go.

Superior Headphone Amplifier onboard

Rode NT-1 + AI-1 Interface Bundle
Not only does the AI-1 deliver crystal clear audio to your computer software, but headphones have never sounded sweeter thanks to the discrete studio-quality headphone output and level control.

Features

Comes with RØDE NT1 studio condenser microphone
Ultra low-noise Class-A discrete preamplifier
Sampling rate of up to 96kHz/24-Bit
Premium discrete headphone amplifier
XLR-1/4” Combo Jack Instrument / line level input
2 x Balanced 1/4” speaker outputs
Rugged body with Satin Black Finish
USB-C/3 connectivity

Specifications

NT-1 Microphone Specifications
Acoustic Principle	Pressure Gradient
Active Electronics	JFET impedance converter with bipolar output buffer
Capsule	1.00″
Address Type	Side
Frequency Range	20Hz – 20kHz
Output Impedance	100Ω
Maximum SPL	132db SPL (@ 1kHz, 1%THD into 1KΩ load)
Maximum Output Level	8.0dBu (@ 1kHz, 1% THD into 1KΩ load
Sensitivity	-29.0dB re 1 Volt/Pascal (35.00mV @ 94 dB SPL) /- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)	4dB-A
Power Options	P24, P48
Weight	440.00gm
Dimensions	187.00mmH x 50.00mmW x 50.00mmD
Output	XLR
Warranty	1 year with free extension to 10 years
AI-1 INTERFACE SPECIFICATIONS
Computer Connectivity	USB
Form Factor	Desktop
Simultaneous I/O	1 x 2
Number of Preamps	1
Phantom Power	Yes
Bit Depth	24-bit
Sample Rates	44.1 kHz 48 kHz 88.2 kHz 96 kHz
Analog Inputs	1 x Neutrik XLR-1/4” combo
Analog Outputs	2 x 1/4” (impedance balanced) 1 x 1/4” (headphones)
Direct Monitor	Yes
USB	1 x USB Type C
Bus Powered	Yes
OS Requirements	Mac OS 10.10 or later Windows 7 or later
Power	USB bus-powered
Depth	100mm total (with knobs) chassis: 88mm
Width	124mm
Height	38mm
Weight	1lb 3.7oz 560g
INPUTS
XLR/MIC INPUT
Dynamic Range	104dBA
Equivalent Input Noise @ Maximum Gain (Source Impedance 150 ohms, 20Hz-20kHz, A-weighted)	–128dBA
Frequency Response (Measured after ADC)	20Hz – 20kHz better than ±1dB
Gain Range	0dB – >45dB
Input Impedance	1.3k Ohms
INSTRUMENT INPUT
Dynamic Range	99dBA
Frequency Response (Measured after ADC)	20Hz – 20kHz better than ±1dB
Gain Range	0dB – >45dB
Input Impedance	900k Ohms
OUTPUTS
MONITOR OUTPUT
Maximum Output Level	-6dBu
Frequency Response	20Hz – 20kHz better than ±1dB
HEADPHONE OUTPUT
Max output power at 1% THD	32Ohms – >210mW 300Ohms – >390mW

Delivery Info

All items that are available for purchase online are subjected to availability. For item that are available, a confirmation email will be sent to your registered email to show that your order had been processed and is ready for collection / to be delivered. In the event whereby the item ordered is unavailable, a notification email will be sent and refund will be initiated immediately.

Self-collect: Item will be ready for collection at our store once the confirmation email is received. Orders that are made on the Weekends or Public Holiday may take about 2-4 working days to process.

Delivery (Local, Singapore): Small items: Delivery will take approximately 3-5 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Singpost or local couriers.

Large / Bulky items: Delivery will take approximately 7-10 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Expandore.

Delivery (Overseas); Shipment will be arranged with our courier partners to be delivered to your shipping address.

If you have other enquirie’s for placing of order and delivery, you can refer to our FAQ here (https://www.expandore.sg/faq/) Or Contact us here (https://www.expandore.sg/contact-us/)

Reviews (0)