Teradek Orbit PTZ 4K 12G-SDI/HDMI Camera Control Tally – Wireless TX
Teradek Orbit PTZ 4K Transmitter includes 1 x Lightstand Adapter 3/8in, 4 x Screw Pan Head Phillips Black Oxide 18-8 SS, M3 8 x 0.5mm, 1 x Hex L key 3/16″ x 2 13/16″ length, 1 x Screw Socket Head Black 1/4-20 x 1-5/8″ length, 4 x Screw Pan Head Philips Black M4 x 8mm length, 1 x Ultra Thin HDMI Male Type A (Full) – HDMI Male Type A (Full) 18in Cable, 1 x SDI 12G BNC to BNC Cable Length: 8in / 20cm, 1 x CORD 18AWG NEMA5-15P – IEC320 6′, 1 x CORD CEE 7/7 TO IEC 320-C13 6′, 1 x XLR to Ptap connector for Orbit PTZ TX 18in. Cable, 1 x Orbit PTZ Foam 1:1, 1 x PSU XLR to 90W AC Adapter, 4 x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna), 1 x Teradek Standard Terms and Conditions, 1 x Insert – Product Register, 1 x Quickstart Guide – Orbit PTZ
Teradek Orbit PTZ takes your PTZ camera and makes it completely wireless. Transmit uncompressed 4K / HD video, as well as Sony VISCA and Panasonic camera control commands up to 1,000 ft. away with no delay.
Power Through Channel Interference
Teradek Orbit PTZ uses our patented Joint Source Channel Coding (JSCC) to transmit video over the unlicensed 5GHz band, providing far better channel utilization and handling of interference than competing H.264 / HEVC transmission methods.
Real-Time Camera Control
Orbit PTZ features RS-232 and RS-422 connectivity for PTZ camera control. Camera commands travel over a zero-latency wireless link between transmitter and receiver, with support for VISCA and Panasonic AW protocols.
Orbit PTZ offers the industry’s best protection against prying eyes with AES-256 encryption and RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.
Easy Mobile Configuration
Command your wireless workflow from the palm of your hand with the Launchpad app for iOS and Android. Pair transmitters and receivers with the touch of a button, monitor channel interference, set operating frequencies, and control your PTZ cameras directly from the app, no cables needed!