Panasonic PT-RQ35K Laser 3-Chip 4K DLP Projector

SKU: PT-RQ35K Category:
Description
Click to rate this post!
[Total: 0 Average: 0]

Panasonic PT-RQ35K 3-Chip DLP 4K Large Venue Laser Projector 

Panasonic PT-RQ35K Projector is the smallest and lightest 3-Chip DLP product in its class and can be transported and installed with just two people. Save on labor costs and enjoy greater convenience when backyard space is limited. A combination of two blue and one red laser expands color-space reproduction by 114 %*3 over the PT-RQ32K. Vivid red and pure blue reproduction heightens realism for an immersive experience and takes high-resolution content to the next level. Redesigned airflow path, cooling system, and finless radiator reinforce reliability. Dynamic Digital Control regulates red laser output and cooling for consistent image quality. Expect 20,000 hours of maintenance-free projection with backup input and laser failover circuitry offering peace of mind when projection can’t be interrupted.

Features:

  • Laser 3-chip DLP, 32.000 lumens (center), 4K (With Quad Pixel Drive On)
  • Lamp-free laser projection with dust resistant liquid cooling system for 20000 hours of maintenance-free operation
  • Smart Projector Control with NFC for mobile access to network con­figuration such as IP address setup
  • Preactivated Upgrade Kits for Geo Pro Software
  • Two blue and one red laser module expand color-gamut reproduction
  • Information Monitor
  • Spellbinding Picture Quality
  • Gradation Smoother Reduces Banding
  • Flexible Black-Level Adjustment
  • Stable Design for Reliable Operation
  • Backup Input Guarantees Picture Display
  • Multi-Laser Drive Engine with Failover Redundancy Circuits

PT-RQ35K Series is the first to equip Panasonic’s new Gradation Smoother function. It reduces banding noise in gradients of shaded color evident in content that lacks the optimal color bit-depth. Operators can select three levels of image correction appropriate to the severity of the problem, or disable the function when it’s not needed. Gradation Smoother is your go-to solution when banding is evident in the projection, but there’s no time to re-edit the content.

PT-RQ35K Series gains new black-level calibration that allows black borders to be reshaped to suit screen curvature using up to 17 control points in much the same way as our Free Grid function. Adjacent images can be matched within a 0.5-dot margin—ideal for 4K video projection—while a wider range of adjustment in finer increments is also enabled.

Multiple Laser modules are equipped with Panasonic’s unique Failover Circuitry. If a single laser diode fails, only diodes in the affected series are bypassed rather than all of the diodes in the module, as is the case with some competitive laser projectors. Projection continues uninterrupted with imperceptible loss in brightness. Failover Circuitry adds another layer of insurance in situations where image display must be maintained.

Specifications
Click to rate this post!
[Total: 0 Average: 0]
General Specifications
Projector type 3-Chip DLP projector
DLP Chip | Panel Size 24.4 mm (0.96 in) diagonal (16:10 aspect ratio)
DLP Chip | Display Method DLP chip x 3, DLP projection system
DLP chip | Number of Pixels 2,304,000 (1920 x 1200 pixels) x 3
Light Source Laser diodes (Blue LD, Red LD)
Light output 30,500 lm/32,000 lm (Center)
Time until light output declines to 50 % 20,000 hours (Normal), 24,000 hours (Eco), 26,000 hours (Quiet)
Resolution 4K (3840 x 2400 pixels) (Quad Pixel Drive: ON)
Contrast Ratio 20,000:1 (Full On/Full Off, Dynamic Contrast [3])
Screen size [diagonal] 1.78–25.4 m (70–1,000 in), 1.78–15.24 m (70–600 in) with ET-D75LE8/ET-D3LET80, 3.05–15.24 m (120–600 in) with ET-D75LE95, 5.08–15.24 m (200–600 in) with ET-D3LEU100/ET-D3LEW200
Center-to-corner zone ratio 90%
Lens Optional (no lens included with this model)
Lens shift | Vertical(From the origin point of the lens mounter) ±55 % (+78 %, +68 % with ET-D75LE95, ±48 % with ET-D3LEW200, ±44 % with ET-D75LE6/ET-D3LEW60) (powered)
Lens shift | Horizontal(From the origin point of the lens mounter) ±20 % (±15 % with ET-D75LE6/ET-D3LEW60/ET-D3LEW200, ±12 % with ET-D75LE95, +25 %, 0 % with ET-D3LEU100) (powered)
Keystone Correction Range Vertical: ±45 ° (± 40 ° with ET-D75LE10/ET-D3LEW10/ET-D75LE20/ET-D3LES20, ±28 ° with ET-D75LE6/ET-D3LEW60, ±22 ° with ET-D3LEW50, ±15 ° with ET-D3LEW200, ±8 ° with ET-D3LEU100, +5 ° with ET-D75LE95),

Horizontal: ±40 ° (±15 ° with ET-D3LEW50/ET-D75LE6/ET-D3LEW60, ±5 ° with ET-D3LEU100/ET-D3LEW200, 0 ° with ET-D75LE95)
When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °.

Installation Ceiling/floor, front/rear, free 360-degree installation
Terminals | SDI IN
Terminals | HDMI In HDMI x 1 (Deep Color, compatible with HDCP 2.2, 4K/60p signal input)
Terminals | DVI-D IN
Terminals | MULTI PROJECTOR SYNC IN BNC x 1
Terminals | MULTI PROJECTOR SYNC OUT BNC x 1
MULTI PROJECTOR SYNC IN terminal/3D SYNC 1 IN/OUT terminal
(dual purpose)
MULTI PROJECTOR SYNC OUT terminal/3D SYNC 2 OUT terminal (dual purpose)
Terminals | Serial In D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | Serial Out D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Terminals | REMOTE 1 IN M3 stereo mini-jack x 1 for wired remote control
Terminals | REMOTE 1 OUT M3 stereo mini-jack x 1 for link control
Terminals | REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
Terminals | DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT compliant), 100Base-TX, compatible with Art-Net, PJLink (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input
Terminals | LAN RJ-45 x 1 for network connection, PJLink (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
Terminals | USB USB connector (Type A) x 1 for optional Wireless Module (AJ-WM50 Series)/USB Memory Stick
Terminals | DC OUT USB Type A x 2 (for power supply, DC 5 V total of 2 A)
Terminals | Expansion slot SLOT 1/SLOT 2 (total two terminals, vacant) for interface boards, SLOT NX compatible
Power Supply AC 200 V–240 V (Light output will decrease when using the projector with AC 100 V to AC 120 V)
Power Consumption 2,550 W (Standby: 14 W)
Cabinet Materials Molded plastic
Operation noise 49 dB (Normal), 46 dB (Quiet)
Dimensions (W x H x D) Approx. 598 x 353 x 780 mm (23 17/32˝ x 13 29/32˝ x 30 23/32˝) (not including protruding parts)
Weight 69.8 kg (153.9 lbs)
Operating Environment Operating temperature: 0–45 °C (32–113 °F)*7, operating humidity: 10–80 % (no condensation)
Applicable Software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Smart Projector Control for iOS/Android
Delivery Info
Click to rate this post!
[Total: 0 Average: 0]

How to shop TAX free in Singapore

9% Goods Service Tax (GST) will be imposed over the total invoice value if purchased locally in Singapore. However if you are a tourist visiting Singapore, this GST amount can be refunded at the Changi International Airport Departure Hall GST Refund Centre before departure with goods within 60 days from the date of purchase. Please note that only Tourists who have met the Tourist Refund Scheme’s conditions and eligibility criteria can claim for the GST refund. Visit the following link for GST Guide for Visitors on Tourist Refund Scheme. https://www.iras.gov.sg/taxes/goods-services-tax-(gst)/consumers/tourist-refund-scheme


All items that are available for purchase online are subjected to availability. For item that are available, a confirmation email will be sent to your registered email to show that your order had been processed and is ready for collection / to be delivered. In the event whereby the item ordered is unavailable, a notification email will be sent and refund will be initiated immediately.

Self-collect: Item will be ready for collection at our store once the confirmation email is received. Orders that are made on the Weekends or Public Holiday may take about 2-4 working days to process.

Delivery (Local, Singapore): Small items: Delivery will take approximately 3-5 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Singpost or local couriers.

Large / Bulky items: Delivery will take approximately 7-10 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Expandore.

Delivery (Overseas); Shipment will be arranged with our courier partners to be delivered to your shipping address.

If you have other inquiries for placing of order and delivery, you can refer to our FAQ here (https://www.expandore.sg/faq/) Or Contact us here (https://www.expandore.sg/contact-us/)

Reviews (0)
0 reviews
0
0
0
0
0

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.